1
$\begingroup$

How do I make the internal speaker work on a Maxtrac 300 With the 5 Pin accessory port on the back of it. My other radio has 16 pins and i jumped 15/16 for that one But lost on how to do this one.. Thank You for the help Allan B

Improve this question
$\endgroup$
2
  • 1
    $\begingroup$ Hello Allan, and welcome to ham.stackexchange.com! $\endgroup$
    – rclocher3
    Commented Dec 1, 2021 at 1:50
  • $\begingroup$ I did quite a bit of searching just now, and the only thing concerning a Motorola Maxtrac 5-pin port found was here. There are other pages there, with many links (which I did not follow). $\endgroup$
    – Mike Waters
    Commented Dec 1, 2021 at 14:47

1 Answer 1

Reset to default
1
$\begingroup$

Found the problem Internal speaker wire missing Put that in and all is good

Improve this answer
$\endgroup$
1
  • $\begingroup$ Glad you fixed it! Please mark this as accepted. :-) $\endgroup$
    – Mike Waters
    Commented Dec 20, 2021 at 2:32

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .