I have a brand new Dell XPS laptop running windows 11 pro. The rig is an IC7300 which I had running WSJT-x (JTDX) as well as other digi modes using ham radio deluxe fine on an older (10 year old machine) windows 10 laptop.I have everything running fairly correct.. it will decode and transmit but wsjt and other digi modes are hearing (i see it on the waterfall) noise inside the room. The only way i can stop it is completely turn the mic off on the computer. Ive turned off all app access to the mic one by one and nothing works except to turn the mic off. the receive level in wsjt-x wont go any lower than 108 no matter what volume settings i use and ham radio deluxe (in DM780) says im overloading the receive as well. I uninstalled and reinstalled the icom drivers a couple times. Even tried using the machine souncard and nothing will fix it.I have the 7300 settings exactly as the hamradiodeluxe site says to have them. Hope someone else has had this issue and can help me out. The only thing thats changed from my original working setup is the new laptop.