A Hytera DMR handset that I am working with has a frequency deviation of 2300-2700 Hz. This is higher than the expected 1944.0 Hz frequency deviation specified in the DMR specification (ETSI TS 102 361-1). Is it expected that low cost handsets have excessive frequency deviation? I'm wondering how the receiver performs synchronization when the frequency deviation can be so far out of range?

More info:

• I/Q samples are collected with an SDR
• This question is not about carrier frequency offset but rather the FSK frequency deviation
• To determine the deviation, I used an FM demodulator then measured the distance between minimum and maximum deviation.