Skip to main content
10 events
when toggle format what by license comment
Apr 27, 2018 at 20:37 history closed Kevin Reid AG6YO Duplicate of Why can't I hear myself from a second radio when bouncing off a repeater?
May 7, 2017 at 19:46 vote accept Thomas
May 5, 2017 at 16:47 comment added Thomas Well, I didn't set it to the lowest setting, since if I did it would "receive" and give me static the whole time. If the RX CTCSS is wrong with KG-UV8D, then you still get the post-send burst? Huh. Well, like I also said I have made contacts over the repeater, so the RX CTCSS is at least not completely wrong.
May 5, 2017 at 16:34 comment added AndrejaKo For example, on my KG-UV8D, everything you describe will happen if the TX CTCSS is correct, but the RX CTCSS is wrong.
May 5, 2017 at 16:34 comment added AndrejaKo Unfortunately, I don't have a Baofeng, but usually, when you reduce the squelch to the lowest setting, the squelch is actually disabled. Also, some radios (perhaps your too) will allow you to have a different CTCSS for transmission and reception. In such case, if the receive CTCSS is wrong, then repeater will hear you fine, but you won't be able to hear the repeater. Also, many radios will light up, even if CTCSS doesn't match, but will not output the radio. That's why I thought that perhaps your receive CTCSS could be wrong.
May 5, 2017 at 14:40 comment added Thomas @AndrejaKo like I said: 1) It works when I reduce SQL 2) I have made contacts with this repeater, so I can receive and send. 3) The radio lights up if receving even if the CTCSS doesn't match.
May 5, 2017 at 13:47 comment added AndrejaKo Check CTCSS settings for your radio. I suspect that they might be misconfigured. If you can, disable any receive CTCSS tones on the radio.
May 5, 2017 at 13:47 answer added Glenn W9IQ timeline score: 5
May 5, 2017 at 13:38 review First posts
May 5, 2017 at 15:56
May 5, 2017 at 13:36 history asked Thomas CC BY-SA 3.0