Skip to main content
10 events
when toggle format what by license comment
Jan 19, 2022 at 10:14 comment added znaya update to the test mentioned above. It seems to be replicable when the radio channel is set to 1 or 10. On channel 2 and 3 seems to result in the squelch issue
Jan 19, 2022 at 1:51 comment added znaya I kept trying all the configs and I just realized that I have success for a brief moment if I 1. Connect the radio to the cable and turn it on 2. Write the original factory frequencies with Chirp 3. Write the PMR446 frequencies with 888s v1.05 4. Unplug the radio WITHOUT turning it off. The green light will be on, there is no squelch problem and the radios seem to receive each other communication. As soon as I change channel or turn the radio off and on the radios won't communicate with each other anymore and the green light won't be lit. I was able to replicate this behaviour a couple times.
Jan 19, 2022 at 1:51 comment added znaya I believe I have the same problem. Bought two BF888s radios, saved the original configuration with Chirp. Programmed it with the PMR 446 frequencies but the radios do not communicate with each other. Tried several programs and (tons of) configurations, I get quite often the squelch problem. One thing I noticed is that the green light is not lit after writing the PMR446 frequencies to the radio.
Jan 5, 2021 at 19:28 history edited James CC BY-SA 4.0
added 133 characters in body
Jan 5, 2021 at 18:12 history edited James CC BY-SA 4.0
deleted 248 characters in body
Jan 5, 2021 at 16:55 comment added Mike Waters I just did this search. It looks like there are a few similar questions and answers that may help.
Jan 5, 2021 at 16:47 answer added rclocher3 timeline score: 1
Jan 5, 2021 at 16:36 comment added rclocher3 Hi James, and welcome to ham.stackexchange.com!
Jan 5, 2021 at 14:10 review First posts
Jan 5, 2021 at 16:36
Jan 5, 2021 at 14:05 history asked James CC BY-SA 4.0