Questions tagged [baofeng]

Baofeng is a manufacturer of radio equipment. Use this tag for questions relating specifically to Baofeng products.

Filter by
Sorted by
Tagged with
4
votes
5answers
4k views

BF-F8HP: “Radio did not respond” when trying to use CHIRP

I'm trying to program my Boafeng bf-f8hp with the chirp software, but as I have to do, "Download From Radio", after I choose the appropriate maker, product and model, all I get is an error message ...
1
vote
1answer
48 views

Baofeng's won't talk to each other - but other radios receive the signal

I'm very new to this radio stuff and I've come across a problem. I have two BF-888S', along with two other radios. (Binatone Terrain 750) All of which are on the same frequency and have the same ...
2
votes
1answer
34 views

UV9RTP Slow transmit to receive

When I transmit the there is a delay in the receiving. When I let off of the mic it still transmits for a few milli-seconds. The transfer to receive is not instantaneous. Which setting controls this ? ...
1
vote
2answers
153 views

How can you receive ISS broadcast using a Baofeng?

I have a Baofeng UV-5R with stock and a Nagoya 701 (maybe fake?) antennas and wonder how I can receive voice from ISS astronauts? Do they have a schedule for going on air? I live in Romania so ...
0
votes
1answer
88 views

Problem with Baofeng BF-888 radios

I have 2 Baofeng bt-888 radios coming out of the box. The problem is that the radios still growl on all channels and the light stays green. Le Griche stops when we send a communication or when we ...
0
votes
1answer
268 views

Creating a low cost ear protection/ PTT setup for hunting

I have been trying to create a low cost communication setup for when I go hunting. Using this setup the hope is to be able to talk to one another while separated without having the audio up too loud. ...
10
votes
2answers
4k views

How do I troubleshoot a Baofeng UV-5R that won't receive?

I have a couple of Baofeng UV-5R radios. I have a profile in Chirp that works great on one of them, and I foolishly pushed that profile straight over to a UV-5R without checking firmware versions. ...
0
votes
2answers
147 views

Can you use 144mhz and below without a license with a Baofeng

I have a Baofeng and all the people that I have asked said that I can use 144mhz and below without a license but what I see on the internet is that I can’t use the Baofeng without a license at all can ...
6
votes
2answers
1k views

What are the official Baofeng websites in the USA?

Which Baofeng website(s) in the USA is (are) official (that is, selling genuine Baofeng radios, programming cables, and accessories)? Which "Baofeng" websites are NOT, allegedly selling counterfeit ...
2
votes
3answers
2k views

Brand new BaoFeng BF-F8HP — how to save settings in a channel memory?

I just got this new 2m/70cm hand-held, and I'm working through programming the local repeaters into channels. I've been able to set the repeater frequency in VFO mode, then save the settings to ...
1
vote
1answer
117 views

How does a Baofeng radio know an incoming transmission is from a repeater?

Baofeng radio's have two menu options for squelch tail elimination (STE). Item 35 is for general simplex STE, and item 36 is for repeater STE. My question is how would the radio know if a transmission ...
1
vote
3answers
261 views

Why can I hear Morse when not in CW mode?

I don't "get" CW. I can't understand the chatter on an FM radio broadcast when my radio is set to AM. This makes sense, the signal is modulated using frequency modulation and I am trying to ...
1
vote
1answer
96 views

Baofeng UV-9 Info and Help Please!

I have scoured the internet for info on this radio. Specs, programming, manuals, to be exact, yet I can find NOTHING other than sellers of the radio. Anyone have any links they'd be able to share! I ...
0
votes
3answers
288 views

Baofeng UV-5R Receiving Intermittent Static? Please help!

I have a Baofeng UV-5R and I have been using it as a police/EMS scanner. I have used it before and it has worked perfectly. I just recently moved to a new area and yet when I went to listen into the ...
0
votes
1answer
91 views

How does PTT from one two-way radio prevent input on another?

I'm very much a beginner with radio. I have a simple set of Baofeng BF-888S radios, and in my basic use with those, I got very curious about something: when you push the PTT button on one radio to ...
3
votes
3answers
1k views

Pair of Baofeng BF-888s stopped communicating after reprogramming - what to do

I got 2 Baofeng 888s off Amazon and reprogrammed them to the 16 legal channels (for unlicensed use) in Germany, up from 446.00625 MHz in 12.5 kHz steps. I used both CHIRP and a software called ZT-V68 ...
5
votes
2answers
6k views

HT programming software alternative to Chirp and RT-Systems

I have been using Chirp to try to program my Baofeng UV-5R but have been having one problem after another. I was wondering if there was an alternative to Chirp and RT-Systems programming software for ...
2
votes
1answer
43 views

Baofeng UV-5RE shows wrong TXP icon

I bought a Baofeng UV-5RE of Alibaba for a little over $30. It seems to work as expected, all the menu items are consistent with the YouTube videos I watched but... the little power icon at the top of ...
4
votes
2answers
851 views

Beginner listening to a repeater - only hearing one station

This morning I tuned in to a repeater about 12km from me (in the UK). I could hear activity, but from only one station. I could tell that there were other stations using that repeater from the ...
10
votes
3answers
8k views

Are Baofeng radios illegal in the U.S?

Having a low price budget, my search for my first ham radio to buy has led me towards Baofeng. A quick Google search on baofeng showed a lot of results that said that certain model baofeng handhelds ...
1
vote
1answer
462 views

Baofeng UV-5R transmitting to Baofeng BF888s - 888s will not receive transmission unless holding “mon”

so i have just received today a baofeng uv-5r that i had ordered, i already had the 888s after programming the uv-5r to the same frequency as the 888s, i am able to recieve transmission all LEDs ...
1
vote
0answers
26 views

Baofeng UV5RA charger station error

I recently bought 2 Baofeng UV5RAs from the same vendor. Neither of the charging stations work. They both flash green/red immediately upon plugging them in--before any battery is seated! When I seat ...
2
votes
1answer
286 views

Lost all pre-programmed channels in BaoFeng UV-5R V2+ after reset. What were they and how do I restore?

I purchased my first radio, and of course I reset it to factory defaults soon after I received it. (I think that wasn't the best thing to do) What options do I have to restore the radio to as-shipped ...
3
votes
1answer
69 views

Baofang uv-5rA/ repeater trouble

I programmed my Baofang UV-5RA radio to my local repeater about less than a 1/4 mile away. When I cue the mic and release, I get a signal from the repeater. However, I can only hear people if I have ...
0
votes
1answer
199 views

Baofeng UV-82 and DM-860 drivers Windows 7

Currently I'm trying to make my radios (Baofeng UV-82 and Baofeng DM-860) friends with my Windows 7 and Chirp. My computer has only USB ports and no COM; Google adviced the Profilic driver (PL2303/...
1
vote
1answer
75 views

Squelch won't stay open on FM 2 meter band

I am currently using a Baofeng BF-F9V2+ radio. I have found the when listening, my squelch won't stay open, despite getting a good clean signal. I am using a homemade verticle dipole antenna for 2-...
1
vote
3answers
114 views

can I still hear a frequency if I can only tune in 5 kHz off?

I'm trying to listen in to the telemetry frequency for Wallops Island which is 411.325 MHz. When I punch this into my radio (Baofeng UV-5R), the closest I can get is 411.320 MHz. Will I still be ...
5
votes
2answers
322 views

BAOFENG UV-5R for cubesat communication on lab, does it work?

Here we have a cubesat which operates in VHF/UHF. Communication with it (from a ground station perspective) is done with an Icom Radio. Would it be possible to replace it with a cheaper BAOFENG?
2
votes
3answers
1k views

Can I build a Yagi antenna for my Baofeng UV-5R?

I would like to build a Yagi antenna for my Baofeng UV-5R, but I'm a total newbie when it comes to amateur radios. The antenna will be for UHF and shouldn't be too long (like 1.5 meters max). So my ...
1
vote
2answers
670 views

GMRS not transmitting within a half mile

I recently got my GMRS license from the FCC, and I wanted to try out a couple radios for hiking and emergency communication. I have two tenway UV-5R pro radios (these do have an FCC ID) that are set ...
3
votes
3answers
1k views

Baofeng DM-1801 DMR: Language switched to Chinese

The screen reset to Chinese characters. How do I get it back to English? I haven’t found any information on this problem.
6
votes
4answers
9k views

UV-5R 4W BFB297 vs UV-5R 8W BFP3-23 (difference 4W vs 8W)

How big difference will it be between UV-5R 4W & newer UV-5R 8W (difference between 4W & 8W), in real life use 1 on 1 HT. In SAME conditions, how much different distance / range will we get? (...
6
votes
3answers
3k views

What is the socket for on this Baofeng BL-5L battery?

I have a Baofeng BL-5L battery for my Baofeng UV-5R transceiver, and I notice that it has a socket on the side: Please, what is this socket for?
4
votes
3answers
578 views

Baofeng radio produces hum when plugged into charger

So I am working on a low cost ham radio beacon using my Baofeng UV-5R radio because it is easy to use and portable. I built a simple PTT interface for a Raspberry Pi and wrote some python to transmit ...
6
votes
4answers
1k views

What is the minimum signal strength I need to receive?

Let's say a transmitting station is using a 8W radio with a J pole antenna. The cable connecting the radio to the antenna is RG-58A/U and is 25ft long. At 144.075MHz, the attenuation of the cable is ...
1
vote
1answer
1k views

Baofeng UV-9R Chirp Pinout

I'm searching the pinout of the Baofeng UV-9R to programm it with Chirp.
23
votes
8answers
47k views

How can I avoid accidentally transmitting with a Baofeng UV-5R?

I don't have $500 for a radio scanner. If I know the few (analog) frequencies that I would like to listen to, I think one can use the Baofeng UV5R (which doesn't cost much). The only problem is that ...
3
votes
2answers
322 views

Can I take and use Baofeng UV-82 in Norway?

Planning to go for a camping trip. According to this document (in Norwegian but easy to understand), I can use a radio running PMR446 and KDR 444 freqs. Baofeng can do this. The question is: is the ...
0
votes
1answer
111 views

How can I determine the possible damages of transmission with detached antenna in portable ham radios?

Premise: I had a Baofeng GT-3 TP Mark III 8W stored and never used, this morning my nephew has found It and He tried to "play with It" transmitting at maximum power(8 Watt) despite antenna wasn't ...
8
votes
5answers
28k views

On which of these frequencies can I transmit without a license?

I have a Baofeng UV-5RA, and I need to know what frequencies on the "channel mode" (what the lady says when you press the "V/M" button on the radio) don't require a ham license. I am in Philadelphia, ...
1
vote
0answers
168 views

Mismatched Radios: A Baofeng UV-5R & a Cobra ACXT 645 [closed]

I've got a Baofeng UV-5R and a Cobra ACXT 645, and I'm trying to get them to communicate. The Cobra transmits and the Baofeng (programmed with CHIRP) receives, but not the other way around. I've ...
1
vote
1answer
568 views

DC connector type for Baofeng UV5R base charger

What type is the DC jack on the Baofeng UV5R base charger? I want to buy a splitter so that I can charge multiple radios with the same car/wall charger.
2
votes
2answers
102 views

Orange Goop Leaking from Power Supply

I have a Baofeng UV-82 with the charging cradle and switching power supply (wall wart). Tonight, I noticed a slick spot on the floor next to the couch, and saw some orange goo on a paper I had picked ...
1
vote
0answers
60 views

Baofeng 888s side key didn't work and solved [closed]

Thanks. Solved. Baofeng 888s, programmed with chirp, worked great. I hit the device with CHIRP many times, Everything was ok., but moni button after a month, didn't work. First I thought that the ...
1
vote
0answers
47 views

Baofeng 888s sidekey (moni) don't work

Baofeng 888s, programed with chirp, worked good but maybe at change channels during pushing moni button or something else (I don't know), don't work. I tried to change side key options by programming, ...
4
votes
1answer
584 views

Can I use CHIRP for programming a Baofeng DM-5R?

I can't find my Baofeng DM-5R in the CHIRP list of supported radios. I've been told that I should try by telling CHIRP to assume a different radio from the DM-5R - perhaps the UV-5R!? Do you know if ...
7
votes
2answers
837 views

How much current can Baofeng UV-5R provide on +V pin?

I noticed that the pinout for cheap Baofeng connectors has +V available. I'm interested in powering some electronics directly from this connector. When unloaded, this seems to have about 3.3V on it, ...
3
votes
3answers
3k views

Baofeng UV-5r drivers for win7

I've been fighting to get chirp working with my father's baofeng radios. The only computer that he has access to has Win 7 installed. The manufacturer drivers won't work with win7. I tried using the ...
4
votes
2answers
1k views

My Baofeng UV-5RV2+ will receive a signal with rubber duck antenna but not with a new Nagoya

I bought my self a Baofeng UV-5RV2+ as an inexpensive way to introduce myself to the world of ham radio. With all of the stock components everything has been working fine. I wanted to try to increase ...
1
vote
1answer
85 views

did static fry my uv5r?

I was hit with a big arc of static from a metal door frame. I was a little over a foot away. It stung pretty good, then my coworker told me I was transmitting. My baofeng uv5r will not stop ...