I've noticed while reading literature and websites geared towards and written by amateurs and ham radio enthiuasts that frequency bands are commonly referred to by wavelength.

In professional environments I have been a part of, we always used frequency (170 MHz) or band name (ie VHF, UHF) to describe the signal.

Why do hams prefer wavelength? Is this tradion or convention? Is it more accurate?

I have seen VHF frequencies referred to by wavelength and UHF frequencies referred to by frequency in the same sentence, thereby lacking consistency.


5 Answers 5


Just to add to the answers already given; there used to be a practice to call "CQ 40m" indicating you are indeed on the 40m band, avoiding stations to comeback to your call if your transmitter would have harmonics... say in the 15m band...

This was obviously a long time ago, when filtering harmonics was more difficult, and more difficult to measure/tune when building/operating equipment... and probably license conditions were different then today's.

Still this practice can be heard on the bands today, although modern transmitters would not have harmonics (or should not have harmonics) outside the band. I guess old habits die hard, especially in Amateur Radio.

I guess the practice referring to the bands is also a matter of "least effort to indicate". Which is already discussed in previous answers. Far more practical to say "I had some contacts on the 20m band" is stead of "I had some contacts between 14.000 MHz and 14.350 MHz"

or band name (ie VHF, UHF) to describe the signal.

To answer that part of the OP question: the indication of VHF/UHF, and respecively HF would be a too broad indication to be accurately describing the operating band.

If you would take HF alone, it would be 9 (or 10, or 11 bands) which are included, namely: 80m, 60m, 40m, 30m, 20m, 17m, 15m, 12m, 10m. Some will count the 6m band as HF and some will count the 160m as HF. Although I believe 6m is actually inside VHF and 160m is actually MF.

VHF would have 3, or 4 bands; 6m, 4m, 2m, and some regions will have an allocation at 220MHz.

And so on so forth; so the indicators "VLF, LF, MF, VHF, UHV, and higher" are not suitable for use for Amateur radio to indicate where you are operating, they do have their uses, and are used if a "broad term" is sufficient in the context of what is communicated...


I'd agree with @user3486184's answer, that this is primarily an effect of tradition. However, what @DaveTweed answered hit the spot how that tradition came to be:

In early radios, you really had not much of a notion of electrical fields doing something periodic at a fixed frequency; these were simple crystal radios, doing nothing but taking the envelope of the (rectified) signal they were fed. They weren't radio frequency selective at all – the channel selection happened by tuning the antenna (ie. matching its resonant frequency to the channel you want to receive), not the receiver circuit, like in (most) modern radios!

So antenna designers were the people that actually executed the concept of channel selectivity first, hence they got some normative powers :)

Now, if you look at this, you'll notice that for someone who builds frame or long wire antennas, wavelength is an excellent description of what they'd be designing the antenna for. You can, within boundaries of material effects, usually scale any antenna design to a different frequency/wavelength by just multiplying its dimensions – and hence, someone who was able to build 200m antenna, was instantly also able to build one for 20m. They were the kind of people that build radio receivers that made it to the "living room customer market", and hence, they decided what as on the frequency selection scale. That was meters.


I think that one reason is that talking about the wavelength gives an immediate sense of the scale of the antenna required.


When I say: "I was on the air on 15 meters", everyone will know that I had some contacts with other stations on one or several different frequencies in the range from 21.000 to 21.450 MHz (at least that's the 15m band in Germany).

If I say, "I was on the air on 21 Megahertz" instead of 15 meters, someone could think that I were on air on exactly that frequency. You could of course also say "I was on the air on the 21 Megahertz band" but saying that takes longer, so it is easier to say "on 15 meters"

So I think it is both a way to keep the description of the band shorter and to clarify that you were on air on a frequency range rather than one frequency only.

  • $\begingroup$ In that context, you could replace "15 meters" with "VHF" and even save syllables too, which is what always perplexed me. $\endgroup$ Jun 4, 2016 at 23:02
  • $\begingroup$ @allanonmage: 15 meters is HF, not VHF. But in any case, designations like HF, VHF and UHF are too broad. The characteristics of individual bands within those categories are different enough that you generally want to be more specific than that. $\endgroup$ Jun 5, 2016 at 17:43
  • $\begingroup$ @Therin This might be culture-specific. In YU-land, we'd often say 21 megs for the entire band and if we want to mean a specific frequency, we'd say 21 000 kilohertz. $\endgroup$
    – AndrejaKo
    Jun 8, 2016 at 22:42

This is tradition, but also has some utility.

It's true that the 2m band is not exactly 150 MHz - but it is useful to refer to the class of radios which will transmit on 144-148 MHz (US) or 144-146 MHz (UK) as 2m radios, rather than by frequency.

It comes down to personal preference and what the audience is expecting. Almost everyone knows 2m means somewhere around 144-148 MHz. Most know that 70 cm is 420-450 MHz or so. Fewer people know that 13cm is 2.4 GHz.

Referring to something as "UHF" is also problematic - the PL-259 connector is also known as a "UHF" connector, because when it was created UHF meant above 30 MHz.

  • $\begingroup$ I thought the band labels were always what they were, and they, at least now, have clear designations corresponding to numbers. $\endgroup$ Jun 4, 2016 at 23:05
  • 1
    $\begingroup$ These days the labels are clear and unambiguous: 3-30 MHz is HF, 30-300 MHz is VHF, 300-3000 MHz is UHF. In the past, that wasn't always the case - the December 1940 ARRL U.H.F. contest ("entirely by u.h.f.!") was on "56, 112, 224 or 448 Mc." $\endgroup$ Jun 6, 2016 at 3:49

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .