3
$\begingroup$

Are plastic predator bird props any effective at keeping away real birds from our antennas?

Can I mount such a plastic predator bird with screws or does it need to wiggle in the wind to be effective?

In the latter case, how do I mount it then?

The props are hollow and have an opening at the bottom which allows them to be filled with sand.

Pictures or drawings of mounting examples in amateur radio applications are very much welcomed!

plastic owl

$\endgroup$
2
$\begingroup$

Try the airport “squawk technique”: run a speaker wire up to the top of the tower rotor box and place an outdoor speaker next to it and a PA system, if your friends come around to annoy your antennas turn it on for a few seconds with a good sharp popping sound to the mic should do. The GRUMMAN Aerospace corporation used to use them at the end of the their airport runways to keep the birds and geese away.

Wrap or place fiberglass window screen mesh around your rotor plate or tower to prevent nesting. Wineries and farmers use this to keep birds and animals away from eating their grapes.

$\endgroup$
5
$\begingroup$

Plastic owl surrounded by pigeons

This came from pigeonpatrol.ca/whos-not-afraid-of-the-owl

$\endgroup$
  • $\begingroup$ I wonder what would happen if the owl would occasionally wiggle in the wind or move every minute or so by any other means? $\endgroup$ – on4aa Apr 1 '16 at 17:00
4
$\begingroup$

They've been shown to only be effective when moved frequently, and even then, some of the biggest pest species like grackles and pigeons catch on quickly and they become completely ineffective, especially when actual predators are scarce. We tried to use them in a garden a couple years ago with very little success, even moving them around every few days.

The bigger question when using them for antennas is, why? If you have issues with birds building nests in your tower or on top of your beams, other methods of exclusion would probably be far more effective. Fiberglass window screen wrapped around the tower at spots where they might try to nest, such as around the rotor plate, ought to do the trick. A few bamboo kabob skewers taped to your beam in the areas where there are big enough flat spots for a nest, such as where the boom meets the elements should also deter nesting there.

If you're concerned about them sitting on the antenna, you aren't likely to do them any harm, and it's pretty unlikely that less than a dozen good sized birds like pigeons will change the characteristics of the antenna noticeably. If droppings are an issue, that could be a bit trickier, but something like a bit of cloth stuck to a motor that spun a few times intermittently to create motion near their favorite perches should deter them. One of the most effective means we discovered was a motion activated lawn sprinkler, which would obviously be impractical to implement on top of your tower, but you can extrapolate other ways of creating motion and/or noise on queue to scare them off.

$\endgroup$
  • $\begingroup$ I talked to the owner of a wildlife control business about bird props. He said that they're a joke in the industry. Everyone sells them, even though everyone knows they don't work. $\endgroup$ – mrog Mar 22 '16 at 18:14
  • 1
    $\begingroup$ Some suggestions for things that might work:pigeonpatrol.ca/whos-not-afraid-of-the-owl $\endgroup$ – user3486184 Mar 31 '16 at 6:40
  • $\begingroup$ @user3486184 Thanks for the great link. You should post that picture as an answer below! $\endgroup$ – on4aa Apr 1 '16 at 10:46
1
$\begingroup$

We had one at our last house to keep the birds out of our 16x16 vegetable garden. That one was effective, as it had a motion sensor that triggered an owl sound and flashed the eyes.

After some months, we noticed the birds were back. The problem was that a wasp had filled the deep motion sensor hole with mud. As soon as I cleaned that out, no birds.

It was placed on a corner post with the sensor pointed at the opposite corner. We never moved it.

$\endgroup$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.