6
$\begingroup$

I'm building a dipole antenna for 433 MHz, first one ever. I will have to use a ferrite bead to balance the feed. How many decibels of attenuation should I expect from the ferrite bead?

$\endgroup$
1
  • 2
    $\begingroup$ Before I edit it, I feel like your question is "how much attenuation is expected" rather than "how much attenuation is needed". Do I read this correctly? $\endgroup$
    – David Hoelzer
    Oct 17 at 14:51
6
$\begingroup$

If you do it right, the bead(s) shouldn't get hot at all, and shouldn't add much loss.

The impedance of the bead(s) should be about 10 x the impedance of the dipole. The current on the feedline with no balun might be about half the antenna current. With the beads on it it'll be less than 1/10 of the curent, or 1/100 of the power. Small beads (3.5 mm inside, 6 mm outside, 12 mm long) can dissipate about 5 W, but in this case they'd dissipate 50 mW if you transmit 50 W, so they'll stay cool.

Remember to run the feed line perpendicular to the antenna for some distance.

$\endgroup$
2
$\begingroup$

Different beats have different attenuation at different frequencies. My gut tells me you want at least 6 dB, preferably more. Guys seem to wind their own inductors as RF chokes but not sure how much attenuation at the desired frequencies.

$\endgroup$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.