2
$\begingroup$

I can't seem to figure out how to set it to the simplex frequency, 146.520. Always skips to 146.525 or 146.500.

Improve this question
$\endgroup$
0

1 Answer 1

Reset to default
2
$\begingroup$

Common solution for this problem is the setting of the frequency step size. That must be different from 25 or 12.5 kHz. Grid step must be set to 20 kHz or 10 kHz or 5 kHz.

According the technical description that is possible. Scroll to that specification point: "Frequency Step: 2.5KHz/5KHz/6.25KHz/10KHz/12.5KHz/20KHz/25KHz".

Improve this answer
$\endgroup$
9
  • $\begingroup$ @RClocher: the text is, with the errors that you wanted to improve, a one-to-one copy of the Baofeng document. Just copy-paste. That is why I rolled-back. And you are right: Baofeng misuses Khz an kHz etc..... $\endgroup$
    – user16925
    Jun 23, 2021 at 22:14
  • 1
    $\begingroup$ Misunderstood that the link was the main target.... Thanks for attention! $\endgroup$
    – user16925
    Jun 24, 2021 at 6:58
  • 1
    $\begingroup$ I just edited to make the link a real link. $\endgroup$
    – webmarc
    Jun 24, 2021 at 13:58
  • 2
    $\begingroup$ If you click on the "?" icon in the editing tool then an editing help pane will open, which is very helpful and doesn't take much space. It will tell you how to make links and many other tricks in the Markdown syntax that is used on this site. $\endgroup$
    – rclocher3 ♦
    Jun 24, 2021 at 14:23
  • 1
    $\begingroup$ Found it; thanks. $\endgroup$
    – user16925
    Jun 24, 2021 at 15:37

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .