0
$\begingroup$

My Tecsum PL_660 Radio display is not showing any kind of frequencies. When ever I press any button on the radio nothing shows up on the display. Kindly suggest what need to be done for the problem and how can I fix it.

$\endgroup$
2
  • 1
    $\begingroup$ Hello and welcome to ham.stackexchange.com! $\endgroup$ – rclocher3 Jun 2 at 15:21
  • 1
    $\begingroup$ Hi Syed! Does your radio have an antenna attached? What station are you trying to listen to, and on what frequency? If you could be specific about what you are trying to accomplish, I think you'll find greater success with the answers provided here. $\endgroup$ – webmarc Jun 2 at 18:21
0
$\begingroup$

I don't have one of these radios so my advice is generic. First, if the radio is being run on batteries, are the batteries fresh? Has the device always been like that, or did it work correctly for a while? (If the radio has always been like that, then if I were you I would return it to the seller.) If it stopped working, was there an incident, such as being knocked to the ground?

If the radio stopped working for no apparent reason, then if it were my radio I would either return it for service or open it up to see if I could find a fault. It's possible that the ribbon cable between the main board and the display came loose. It's also possible that there is a manufacturing defect such as a badly-soldered IC.

If you want to share more information, please do so by editing your question.

$\endgroup$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.