6
$\begingroup$

I live in the 4th floor of a building with one side facing south and the other north. I am able to use my 2M mobile base transceiver with a mobile magnet mount antenna placed just outside the window. I get fairly decent coverage of areas on one side of the building with this setup. My question: Is there a simple way to couple two mobile antennas (one on each side of the building) so I have good coverage of both (north and south) sides at the same time?

$\endgroup$
  • $\begingroup$ Receive-only or do you want to transmit with these antennas, too? $\endgroup$ – Marcus Müller Jun 25 '18 at 6:31
  • $\begingroup$ Preferably both receive and transmit $\endgroup$ – 4G1BGS Larry Jun 25 '18 at 7:28
  • $\begingroup$ It be really cool if you could turn this into a tuned phased array but I think that’s out of the scope of most people. $\endgroup$ – RoboKaren Jul 1 '18 at 9:54
9
$\begingroup$

As one solution, you can combine the antennas with a power divider. See How to combine two 50 Ω antennas such that they appear as one 50 Ω load?

This makes your pair of antennas into a phased array. If there's no overlap between their coverage, you effectively lose half your antenna gain, or 3 dB. This is because on transmit, half your power goes into the other antenna which sends that power in the "wrong" direction. And by reciprocity the same happens on receive.

In practice there will be some overlap in their coverage, you will get areas of constructive and destructive interference between the two antennas depending on their relative phase. The effect will be grating lobes. I'd guess however it's no worse than all the reflections already present in an urban environment.

Alternately, you could install a switch, and select the antenna which works best for a particular situation. This avoids the 3 dB loss and grating lobes, but of course you have to operate the switch.

$\endgroup$
  • $\begingroup$ Thanks Phil for your inputs. Will experiment on these suggestions. $\endgroup$ – 4G1BGS Larry Jun 26 '18 at 0:13
  • $\begingroup$ Yes there will be an overlap in coverage between the antennas. The opposite sides of the building are only 20 meters apart, and although there are several concrete walls in between the RF signal will propagate through it and for a good distance beyond. It would be interesting how this interference works out. $\endgroup$ – 4G1BGS Larry Jun 26 '18 at 0:22

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.