2
$\begingroup$

I have a Yaesu FTM-400XDR, but this applies equally to at least the FTM-100 series and probably other radios.

When you program memory channels/frequencies, you can select one of three options: Select, Skip and Off(blank).

Select is obvious - in memory scan mode, the radio scans these program settings and ignores all others.

Skip vs. Off/Blank is eluding me however. What is the functional difference between them? Is there some mode in the radio where they act differently?

$\endgroup$
3
$\begingroup$

It seems on at least the FTM-400 series, there is a use for this. You can set the scan mode to "all mem" or "select mem":

  • in "all mem" mode, the radio will scan all of the programmed channels, unless they are set to "skip". In other words, this gets "select" channels plus "off/blank" channels.
  • in "select mem" mode, which seems to be the default, the radio will only scan "select" channels. All others are skipped.

So in practice, this gives you three sets of programs:

  • "Select" will always be scanned, in either mode; these are frequencies you always want to scan
  • "Off/Blank" will only be scanned in "all mem" mode; these are frequencies you sometimes want to scan, but sometimes don't
  • "Skip" will never be scanned; these are frequencies you never want to scan.

I just figured this out today and thought I'd share, in case it benefits others.

$\endgroup$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.