I know repeaters don't have to have a control operator at the radio in order to transmit given certain conditions are met.

Are there any restrictions to setting up automated stations which transmit upon receiving specific transmissions from their operators or other operators, but do not act as repeaters? I know beacons are a special case in that they transmit on a schedule.

What restrictions apply to unattended, automated stations?

The specific problem I'm trying to solve involves automating a connection between two distant radios. The originating radio needs to make several transmissions in sequence due to a user instructing it to, without giving it specific frequencies, sequences, and data to transmit (ie, the radio decides what to transmit). The receiving radio, however, may not have a control operator nearby. It still has to listen, and if it gets a "call" from the originating radio it needs to respond, even if there's no control operator nearby.

Under what rules would this type of automation be acceptable?


3 Answers 3


Digital signals are allowed, so long as they follow this FCC regulation:

§97.221 Automatically controlled digital station.

(a) This rule section does not apply to an auxiliary station, a beacon station, a repeater station, an earth station, a space station, or a space telecommand station.

(b) A station may be automatically controlled while transmitting a RTTY or data emission on the 6 m or shorter wavelength bands, and on the 28.120-28.189 MHz, 24.925-24.930 MHz, 21.090-21.100 MHz, 18.105-18.110 MHz, 14.0950-14.0995 MHz, 14.1005-14.112 MHz, 10.140-10.150 MHz, 7.100-7.105 MHz, or 3.585-3.600 MHz segments.

(c) Except for channels specified in §97.303(h), a station may be automatically controlled while transmitting a RTTY or data emission on any other frequency authorized for such emission types provided that:

(1) The station is responding to interrogation by a station under local or remote control; and

(2) No transmission from the automatically controlled station occupies a bandwidth of more than 500 Hz.

[60 FR 26001, May 16, 1995, as amended at 72 FR 3082, Jan. 24, 2007; 77 FR 5412, Feb. 3, 2012]

In any case, if there's a human on one end, I would think it would be considered remote control, and thus eligible for those rules. But just in case, I would stick to these regulations.


Certainly unattended packet radio stations can operate without a control operator present.

Not just digipeaters, but store-and-forward messaging systems and also the Packet BBS systems.

Of course, the station needs to be sure to identify every 10 minutes.

You will notice that on voice repeaters the ID is allowed to be done in Morse code AFSK.


You haven't identified in which country you'll be operating - the rules vary by country.

In many countries, what you are describing would be legal (e.g. in Canada, assuming you had privileges for the frequency you wished to use). In some it might depend on license class. In some it might not be permissible at all.

  • 4
    $\begingroup$ The country is specified in the tags of the question: united-states. $\endgroup$
    – Kevin Reid AG6YO
    Commented Jun 14, 2017 at 23:05
  • 1
    $\begingroup$ Hello Jim, and welcome to ham.stackexchange.com! Please consider taking the tour to get the most from the site. $\endgroup$ Commented Jun 14, 2017 at 23:53

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .