What are some equivalents of a BF199 transistor?

The schematic uses a BF199 transistor which is marked "obsolete" by some component suppliers. What would be a current and widely available equivalent?

I tried to search at my preferred shop, https://www.rs-online.com using the following properties:

• Si NPN RF Transistor
• Vcb max 40V
• hFE min 38
• ft 1100 MHz
• Pc 350 mW

And did not find anything suitable.

The original data sheet is here: https://www.mouser.com/ds/2/308/BF199-1118776.pdf

This is not a terribly critical application, and there are many transistors that would work. If you have some NPN transistors on hand, try those. It may work anyway, with some reduction in gain. If you'd like to buy new transistors, I'd look for something with a high gain bandwidth product.

• Phil Frost I think you're wront at'll, all transistor're designed for a specific target. Overall, about rf, medical instrumentacion, space application, etc. There's not a simple answer. Mar 23 '19 at 4:43
• @user14522 It is not the case that all transistors are designed for a specific application. Mar 24 '19 at 0:50
• Yes. That’s why there are “general purpose” transistors Mar 24 '19 at 5:00
• When I was in high school I did a one-transistor project and I did not have the right transistor at all. I had an NPN transistor of some total different type. I used it. The project (an amplifier) worked. I thought, let me try some other NPN transistors. Every NPN transistor I used, every one of them different, worked and I could not tell much of a difference in performance. Nov 16 '19 at 1:24
• @JindrichVavruskaOK4RM that sounds like more of an answer than a comment. Oct 10 '20 at 14:23

A 2N5109 will work just fine.

• You'd get more points if you found one that met (or exceeded) the original specifications, and was in a TO-92 package ;) Mar 8 '18 at 2:13
• @ScottEarle So are you saying the 2N5109 didn't meet the original specs? I thought that it did. It comes in different packages, but I always buy it in the TO-39 metal package so that I can heatsink it for some of my applications. Mar 23 '19 at 23:39
• It looks like it meets (or exceeds) the specs, but being a different case style means you can’t just drop a replacement in and not have to worry about which pin is which. Someone with less electronics experience would probably be more worried about getting the pins the wrong way round than whether the Hfe was high enough (for example) Mar 23 '19 at 23:54
• @ScottEarle Okay then, can you answer the question with a better transistor? :-) Mar 24 '19 at 20:15

When faced with a question like this, I find it easiest to use the selection "filters" at the web sites of the major distributors. My favorites are DigiKey, Mouser and Arrow, but there are others and your region may have different suppliers.

Using the Mouser web site, I was able to find six (6) part numbers with $$f_t$$ between 600MHz and 1200MHz, priced between 80 cents and 5 dollars.

• Check your PIN-OUT because Phillips is different from Motorola and Fairchild it has to be turned backwards to work. Always compare the Data-sheets of different manufacturers and use a semiconductor tester to be sure you got what you ordered especially on Ebay. Nov 12 '19 at 2:56

The very common BC547 and the 2SC945 will both work in your FM receiver.